Categories
Search by vehicule
Skip this step

VLGVV52AF

Active filters

  • new  Origin
  • New
Thermostat for Aixam and...

Aixam and Minauto with Kubota Z482-E5B Engine The thermostat (commonly called a calorstat) is a mechanical thermostatic valve located in the cooling system. On Aixam and Minauto Ambition range models (powered by the Kubota twin-cylinder diesel engine), it acts as a thermal “regulator”.
€48.50
  • new  Origin
  • New
Valve Keeper (Half-Moon...

Aixam for Kubota engines Z402, Z482, Z602, Z482-E4B, Z602-E4B and Z482-E5B The valve keeper (also known as a valve collet or valve lock) is a small semi-cylindrical and tapered metal component. Always used in pairs (two keepers per valve), it fits into the grooves of the valve stem and locks into the upper spring retainer. On the Kubota twin-cylinder diesel engine used in Aixam and Minauto vehicles, these small retainers have the critical task of keeping the valve spring compressed to ensure the valve remains properly closed.
€16.40
  • new  Origin
  • New
Valve Cap for Aixam and...

Aixam for Kubota engines Z402, Z482, Z602, Z482-E4B, Z602-E4B and Z482-E5B The valve cap (often called a valve stem cap) is a small cylindrical metal cap made of very hard steel that fits directly onto the upper end of the valve stem. On the Kubota twin-cylinder diesel engine used in Aixam and Minauto ranges, this part acts as a buffer zone: it is the surface on which the rocker arm strikes thousands of times per minute to push the valve down and open the combustion chamber.
€7.20
  • new  Origin
  • New
Fuel Pump Filter Seal Kit...

Aixam and Minauto with Kubota Z482-E5B Engine The fuel pump filter seal kit includes all the O-rings and washers required to ensure the fuel filtration unit is properly sealed. On Aixam and Minauto models from the Ambition generation range (powered by the Kubota twin-cylinder diesel engine), the fuel pump (mechanical or electric depending on the version) pushes diesel fuel through a filter bowl or cartridge before sending it to the injection pump.
€28.20
  • new  Origin
  • New
INTAKE VALVE FOR AIXAM AND...

Aixam and Minauto with Kubota Z482-E5B Engine The intake valve is a key component of the cylinder head. On the Kubota twin-cylinder diesel engine used in the Aixam and Minauto Ambition generation, its role is to open and hermetically close the air intake passage. Operated by the camshaft through the rocker arms, it opens to allow fresh filtered air into the cylinder for optimal diesel fuel combustion, then closes immediately to ensure complete engine sealing during the compression phase.
€45.60
  • new  Origin
  • New
Crankshaft Bearing Aixam...

Aixam and Minauto with Kubota Z482-E4B and Z482-E5B Engine – Flywheel Side Crankshaft bearings (also known as main bearings) are smooth semi-circular shells made from anti-friction alloys, typically bi-metal or tri-metal. Installed directly in the engine block, they are positioned between the cast-iron crankcase and the crankshaft journals. On the Kubota Z482 twin-cylinder diesel engine (available in the Z482-E4B Euro 4 and Z482-E5B Euro 5 versions) used in Aixam and Minauto vehicles, these bearings are subjected to extremely high cyclic compression loads generated by the combustion process.
€37.70
  • new  Origin
  • New
Complete Fuel Filter Aixam...

Aixam and Minauto with Kubota Z482-E5B Engine The complete fuel filter is the assembly responsible for receiving, cleaning, and managing the fuel supply before it enters the injection pump. On the Kubota Z482-E5B twin-cylinder diesel engine (complying with strict Euro 5 emissions standards) fitted to recent Aixam and Minauto models, fuel filtration requires absolute precision. The tolerances of Euro 5 injection components are measured in microns: the slightest dust particle or microscopic drop of water can seize an injector or permanently damage the components of the high-pressure pump.
€284.60
  • new  Origin
  • New
Rocker Arm Adjusting Screw...

Kubota Z402, Z482, Z602, Z482-E4B, Z602-E4B and Z482-E5B Engine The rocker arm adjusting screw lock nut is a highly specialized fine-thread lock nut. Screwed directly onto the adjusting screw at the end of the rocker arm, its unique and essential function is to securely lock the adjusting screw in place after the valve clearance (intake and exhaust) has been adjusted on Kubota twin-cylinder diesel engines used in Aixam and Minauto vehicles.
€2.50
  • new  Origin
  • New
Rocker Arm Adjusting Screw...

Kubota Z402, Z482, Z602, Z482-E4B, Z602-E4B and Z482-E5B Engine The rocker arm adjusting screw is the precision-threaded component that passes through the end of each rocker arm. On Kubota twin-cylinder diesel engines used in Aixam and Minauto vehicles, this screw makes direct contact with the top of the valve (or its protective cap). Its role is essential: it allows precise manual adjustment of the minimum mechanical clearance (the  valve clearance ) required to compensate for the thermal expansion of metal components as the engine reaches operating temperature.
€6.20
  • new  Origin
  • New
Cylinder Head Gasket Aixam...

Aixam and Minauto Kubota Z482-E4B and Z482-E5B Engine The cylinder head gasket is the most important sealing component in your engine. Positioned under high pressure between the cast-iron engine block and the aluminum cylinder head, it must provide a perfect seal between three separate and essential systems.
€107.60
  • new  Origin
  • New
Alternator for Aixam and...

Aixam and Minauto Ambition Range The alternator is the heart of your vehicle’s electrical system. Driven by the Kubota twin-cylinder diesel engine via an accessory belt, its role is twofold. On the Ambition generation (Aixam City, Coupé, Crossline and Minauto), the charging system is particularly heavily used due to modern onboard electronics. Exposed to constant vibrations from the diesel engine, high temperatures under the hood, and humidity, the alternator (or its integrated voltage regulator) may eventually fail.
€420.90
  • new  Origin
  • New
Gasket Set for Aixam and...

Aixam and Minauto with Kubota Z482-E5B Engine The complete gasket set includes all sealing gaskets, oil seals, and washers required when opening or rebuilding an engine. On the Kubota Z482-E5B twin-cylinder diesel engine (the latest generation complying with Euro 5 emission standards) fitted to recent Aixam and Minauto models, maintaining perfect sealing is essential.
€222.40
  • new  Origin
  • New
Diesel Fuel Pump Filter for...

Aixam City, Coupé, Crossline, Crossover and Minauto Ambition Range The diesel fuel pump filter (or replacement cartridge) is the consumable component installed inside the filter bowl or directly screwed underneath the pump head. On the Aixam and Minauto Ambition generation equipped with the Kubota diesel engine, this filter captures even the smallest impurities (dust, tank residues, carbon deposits) and separates the water present in fuel from service stations.
€50.60
  • new  Origin
  • New
Interior mirror Aixam

Aixam 300, 400, 500, 400.4, 500.4, 500.5, A721, A741, A751, City, City S, Roadline, Scouty, Crossline, City, Crossover, GTO, Coupé, Mega Phase 2, and all Minauto models. The interior rear view mirror is a mandatory safety component that ensures clear rearward visibility and helps reduce blind spots during manoeuvres, overtaking, and braking. On Aixam and Minauto microcars, the central mirror is exposed to the strong vibrations typical of twin-cylinder diesel engines.
€29.90